ASI 161 Security Grab Bar, 30” – Chase Mount
ASI · Model 161
The ASI 161 is a chase-mounted 30" security grab bar with a closure plate, made of Type 304 stainless steel with a satin finish on all exposed surfaces. The 1-1/2" diameter tubing has an 18 gauge wall, and the 1/8" thick, 3" diameter flanges are fully welded to the tube ends. For an anti-ligature design, a 12 gauge closure plate is welded to the bottom of the bar, and the plate has a built-in drainage system. It mounts through six pre-drilled wall openings with threaded rods, washers and nuts (supplied); rod length depends on the wall thickness, which is specified when ordering. ASI states the bar is built to support a load in excess of 250 pounds, provided the wall fasteners are sized for the loads. For 2010 ADA Accessibility Standards, the top of the bar is installed 33" minimum to 36" maximum AFF. ASI lists a warranty of one year from the date of invoice.
- Type 304 stainless steel, satin finish
- Chase (rear) mounted with threaded rods, washers and nuts
- 30" length; 1-1/2" dia. tubing, 18 gauge wall
- Built to support a load in excess of 250 pounds
Browse the product catalog