Bradley 6562 Vertical Tank Liquid Soap Dispenser, 40 oz, Satin Stainless
Bradley · Model 6562
Where wall width is tight, the 6562 turns the tank vertical: 4-13/16" W x 8-1/4" H x 2-7/8" D in 20-gauge satin stainless steel, with the back heliarc welded to the body. It holds 40 oz of liquid soap, and the chrome-plated brass push-in valve portions vegetable or coconut oil soap, detergent or antiseptic solution with less than 5 lbs of force. A sight gauge shows when to refill through the key-locked filler top, and the vandal-resistant cover and concealed mounting deter tampering. The liquid valve service kit is P15-408. Bradley lists the 6562 as BradEx and ADA compliant.
Product Materials
Body: 20 gauge stainless steel with exposed surfaces in architectural satin finish.
Back: 20 gauge stainless steel; heliarc welded to the body.
Wall Plate: stainless steel.
Liquid Soap Dispenser: chrome-plated brass housing with ABS plastic
mechanism.
Foam Soap Dispenser: chrome-plated ABS mechanism.
Capacity
40-oz. liquid or bulk foam soap.
Operation
Push-in valve dispenses measured amount of vegetable or coconut oil liquid
soaps, synthetic detergents, antiseptic solutions or foam soap with less than 5 lbs.
of force. Sight gauge indicates refill time. Locked filler top opens with special key
provided.
Bradley liquid soap valves operate best with any vegetable oil or coconut oil hand
soap having a 10−15% soap concentration.
Bradley foam soap valves work with majority of bulk foam soap.
Installation
Verify all rough-in dimensions prior to installation. Secure separate mounting
bracket to wall. Slide dispenser into place and secure locking screw through filler
hole.
Guide Specification
Surface-mounted soap dispenser shall be fabricated of 20 gauge satin finish
stainless steel. Dispenser shall have completely concealed mounting, vandalresistant filler hole cover and sight gauge. Push-in corrosion-resistant soap valve.
Capacity: 40-oz. liqiod or bulk foam soap. Requires less than 5 lbs. of force to
dispense soap.
Overall dimensions: 4-13/16"W x 8-1/4"H x 2-7/8"D.
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibility of the installer.
Service Kits
Liquid Soap Valve - P15-408
Foam Soap Valve - P15-510
- Upright 40 oz tank only 4-13/16" wide for tight wall spaces
- Heliarc-welded 20-gauge stainless steel back and body
- Chrome-plated brass push-in valve needs under 5 lbs of force
- Sight gauge with a key-locked, vandal-resistant filler top
- Concealed mounting deters removal
- P15-408 liquid valve service kit; BradEx
Browse the product catalog